Senin, 13 Mei 2024

OR Gate | Gerbang OR | Basic Logical Gate | Gerbang Logika Dasar

OR Gate

OR gates are basic logic gates, and are available in TTL and CMOS ICs logic families. The standard 4000 series CMOS IC is the 4071, which includes four independent two-input OR gates.

The TTL device is the 7432. There are many offshoots of the original 7432 OR gate, all having the same pinout but different internal architecture, allowing them to operate in different voltage ranges and/or at higher speeds. In addition to the standard 2-input OR gate, 3- and 4-input OR gates are also available.
In the CMOS series, these are: 4075: triple 3-input OR gate 4072: dual 4-input OR gate Variations include: 74LS32: quad 2-input OR gate (low power Schottky version)
74AC32: quad 2-input OR gate (advanced CMOS version) - similar to 74HC32, but with significantly faster switching speeds and stronger drive
74HC32: quad 2-input OR gate (high speed CMOS version) - has lower current consumption/wider voltage range 74LVC32: low voltage CMOS version of the same. Analytical representation f(a,b)=a+b-a*b is the analytical representation of OR gate: f(0,0) = 0+0-0*0 = 0 f(0,1) = 0+1-0*1 = 1 f(1,0) = 1+0-1*0 = 1 f(1,1) = 1+1-1*1 = 1 OR gates with many inputs
More efficient implementations use a cascade of NOR and NAND gates, as shown in the picture below.
OR gates with multiple inputs are designated with the same symbol, with more lines leading in.
While direct implementations with more than three inputs are possible in logic families like CMOS, these are inefficient.



Gerbang OR
IC CMOS CD4071BE
Basic Logical Gate - Gerbang Logika Dasar
Digital Electronic - Elektronika Digital
Hobi Elektronika
Electronic Hobbies

AND Gate | Gerbang AND | Basic Logical Gate | Gerbang Logika Dasar

AND Gate

The AND gate is a basic digital logic gate that implements logical conjunction (∧) from mathematical logic – AND gate behaves according to the truth table. 
A HIGH output (1) results only if all the inputs to the AND gate are HIGH (1). 
If not all inputs to the AND gate are HIGH, LOW output results. 
The function can be extended to any number of inputs.

The AND gate with inputs A and B and output C implements the logical expression  C=A.B 
This expression also may be denoted as C = A∧B or C = A&B

In logic families like TTL, NMOS, PMOS and CMOS, and AND gate is built from a NAND gate followed by an inverter. 
In the CMOS implementation above, transistors T1-T4 realize the NAND gate and transistors T5 and T6 the inverter. 
The need for an inverter makes AND gates less efficient than NAND gates.

AND gates can also be made from discrete components and are readily available as integrated circuits in several different logic families.

Analytical representation
f(a,b) = a*b is the analytical representation of AND gate:

f(0,0) = 0*0 = 0 
f(0,1) = 0*1 = 0 
f(1,0) = 1*0 = 0 
f(1,1) = 1*1 = 1 

AND gates with multiple inputs are designated with the same symbol, with more lines leading in. 
While direct implementations with more than four inputs are possible in logic families like CMOS, these are inefficient. More efficient implementations use a cascade of NAND and NOR gates, as shown in the picture on the right below. 
This is more efficient than the cascade of AND gates shown on the right.

Gerbang AND
IC CMOS CD4081BE
Basic Logical Gate - Gerbang Logika Dasar
Electronic Digital - Elektronika Digital
Electronic Hobbies
Hobi Elektronika

Digital Microscope Zoom 1000x - Repair Tools - Perbaikan Ponsel

Digital Microscope / Mikroskop Digital - Zoom 1000x

Apa itu Mikroskop Digital?
Mikroskop digital (digital microscope) adalah mikroskop yang berisi kamera digital kecil untuk mengambil gambar.
Gambar yang dilihat melalui mikroskop digital dapat diproyeksikan ke monitor komputer dan disimpan pada file komputer untuk digunakan di masa mendatang. Gambar tersebut juga dapat dicetak jika komputer dilengkapi dengan printer digital. Kelebihan Mikroskop Digital Mikroskop digital hadir sebagai teknologi modern yang memiliki kelebihan berikut ini: - Dengan digital USB microscope, Anda dapat menangkap gambar dan melihatnya dalam 3D. - Gambar dapat diperbesar dan ditangkap secara real time. - Mampu menyimpan dan mengirim gambar ke komputer. - Sangat serbaguna untuk semua jenis pengamatan. - Dilengkapi dengan fitur-fitur pendukung gambar berkualitas tinggi. - Pengoperasian cepat dan mudah. Mikroskop digital atau digital microscope terdiri dari bagian-bagian berikut ini: 1. Konektor USB Kabel USB yang digunakan untuk menghubungkan mikroskop digital ke komputer. 2. Sensor microtouch Sensor layar sentuh yang dapat digunakan untuk mengambil gambar dan mengontrol LED. 3. Pengunci (scroll lock) Bagian mikroskop yang berfungsi untuk mengunci pembesaran yang sedang digunakan. 4. Tombol pembesaran (magnification dial) Tombol yang digunakan untuk menyesuaikan kekuatan pembesaran mikroskop. 5. Pengaturan pembesaran (adjustable magnification) Adjustable magnification menampilkan variabel pembesaran mikroskop. 6. Pencahayaan (lighting) Lampu LED untuk penerangan saat pengamatan. 7. Pengaturan polarizer Filter optik yang berfungsi untuk menghilangkan silau atau cahaya polarisasi. 8. Kamera optik Kamera optik digunakan untuk mengambil gambar dengan resolusi dan ukuran tertentu. Beberapa fitur yang umumnya tersedia pada mikroskop digital Dino-Lite adalah sebagai berikut: 1. FLC (Flexible LED Control) FLC menyediakan opsi untuk menyesuaikan kecerahan LED dan untuk menghidupkan atau mematikan LED menurut kuadran. 2. Sensor Microtouch Fitur Micro Touch pada model USB biasanya digunakan untuk memicu pengambilan gambar yang dapat dikontrol melalui software DinoCapture (Windows) atau DinoXcope (Mac OS). 3. Automatic Magnification Reading (AMR) AMR adalah fitur pembacaan perbesaran otomatis yang menampilkan perbesaran melalui software. AMR hanya tersedia pada mikroskop digital model Edge Series AMR tertentu. 4. Polarisasi Model mikroskop digital tertentu menyertakan fitur polarizer yang dapat dinyalakan/dimatikan atau dapat disesuaikan untuk menawarkan polarisasi penuh atau setengah. 5. Diffuser Diffuser adalah insert plastik polioksimetilen tambahan untuk menyebabkan cahaya secara merata sehingga mengurangi jumlah silau yang akan dihasilkan. 6. Axial Illumination (AXI) AXI dirancang untuk memberikan penerangan aksial atau brightfield yang dapat dikontrol dengan perangkat lunak. Dimana Saja Mikroskop Digital Digunakan? Mikroskop digital telah banyak digunakan di berbagai sektor, beberapa di antaranya adalah: 1. Sektor Industri Mikroskop digital dapat digunakan untuk tujuan inspeksi visual, mendeteksi goresan, korosi, dan keausan. Contoh industrinya seperti: tekstil, logam, dirgantara, elektronik dan lain-lain. 2. Sektor Medis Mikroskop digital dapat digunakan untuk pemeriksaan dan observasi medis, dermatologi, dan trikoskopi. 3. Sektor Perhiasan dan Kerajinan Mikroskop digital juga dapat digunakan untuk pengerjaan dengan fokus yang tinggi seperti pada material logam mulia dan permata. 4. Sektor Pendidikan Mikroskop digital dapat memberi kemudahan bagi para siswa untuk mengamati spesimen biologi karena penggunaannya yang praktis. 5. Sektor Penelitian dan Pengembangan Mikroskop digital juga memungkinkan para peneliti untuk meneliti organisme mikroskopis dan spesimen dengan presisi mikron.

Repair Tools - Perbaikan Ponsel Support di Windows - Mac - Android Hobi Elektronika Tukang Servis HP

BATTERIES Series and Paralels | Baterai Seri - Baterai Paralel

BATTERIES Series and Paralels

Pengertian Rangkaian Seri dan Paralel
Komponen rangkaian listrik atau elektronik dapat dihubungkan dengan berbagai cara.
Dua jenis yang paling sederhana adalah rangkaian seri dan rangkaian paralel.
Rangkaian yang disusun secara paralel disebut rangkaian paralel, sedangkan rangkaian yang disusun berderet dan seri disebut rangkaian seri.
Komponen yang disusun secara seri akan dihubungkan oleh suatu jalur sehingga arus akan mengalir ke seluruh komponen.
Pertimbangkan rangkaian sederhana yang terdiri dari 4 bola lampu dan baterai 6 V.
Dalam rangkaian paralel, tegangan pada setiap komponen adalah sama, dan arus total adalah jumlah arus yang mengalir melalui tiap komponen.
Jika keempat lampu dihubungkan secara paralel, arus yang melalui setiap lampu akan digabungkan, sedangkan tegangan turun di setiap lampu dan semuanya akan menyala.
Jika semua 4 lampu dihubungkan secara seri, arus listrik yang melalui setiap lampu sama dan penurunan tegangan pada setiap lampu adalah 1,5 V. Tidak cukup untuk menyalakan semua lampu.
Terlepas dari kelemahan ini, pengaturan paralel memiliki kelebihan tertentu dibandingkan pengaturan batch. Keuntungannya adalah jika salah satu komponen dilepas atau rusak, komponen lainnya tetap berfungsi dengan baik.
Rangkaian paralel adalah rangkaian listrik yang semua komponen inputnya berasal dari sumber yang sama, semua komponen tersebut disusun secara paralel satu sama lain. Inilah yang membuat koneksi paralel pada rangkaian listrik lebih mahal (membutuhkan lebih banyak kabel).
contoh, terdapat empat buah baterai yang disusun dan dihubungkan secara seri masing-masing berkapasitas 3,5 volt dan 2 Ah, sehingga bila dihubungkan secara seri menjadi 3,5 + 3,5 + 3,5 + 3,5 volt = 7 volt dan 2 Ah.
Gabungan rangkaian seri dan rangkaian paralel disebut rangkaian paralel seri (terkadang disebut rangkaian campuran atau rangkaian gabungan). Rangkaian seri baterai biasanya menghubungkan anoda (positif) ke katoda (negatif), meningkatkan tegangan pada rangkaian. Tidak ada penambahan amp-jam pada sambungan seri, sehingga arusnya masih hanya 2 Ah.
Rangkaian Paralel, ketika 4 baterai dihubungkan secara paralel dengan masing-masing baterai 3.5V dan 2Ah, itu akan menjadi 3.5V dan 8Ah. Angka ini diperoleh dengan menjumlahkan arus listrik per jam dari setiap baterai.
Namun saat baterai habis, indikator utama yang bisa kita lihat adalah tegangan baterai dan bukan arus baterai. Untuk kendaraan listrik, ketika voltase tinggi, berarti kita ingin mengikuti kecepatan atau kecepatan maksimum mobil tersebut. Sedangkan jika ingin menambah jarak tempuh, tinggal menambah amp-hour saja.
Sebab, pada setiap aki kendaraan listrik, baik itu mobil listrik maupun sepeda motor listrik, pasti ada kombinasi seri dan paralel kemudian dirangkai menjadi satu.
Jika ada lima buah baterai yang dihubungkan dan dihubungkan secara paralel dengan spesifikasi baterai yang sama. Maka jam ampere baterai adalah 2 Ah + 2 Ah + 2 Ah + 2 Ah + 2 Ah = 10 Ah.
Secara teori sangat sederhana jika kita ingin mengetahui perbedaan rangkaian seri dan paralel pada sebuah baterai, dari hal yang sederhana ini kita juga dapat mengetahui tata letak baterai pada kendaraan listrik.


Baterai Seri - Baterai Paralel Perhitungan vs Pengukuran Electronic Hobbies
Hobi Elektronika

Troubleshooting and Repairing Electronic Circuit

Troubleshooting and Repairing Electronic Circuit

Troubleshooting is the process of isolating and identifying a fault in something so that it can be repaired. There are lots of variables to consider when troubleshooting a faulty electronic circuit. In this article we will look at the techniques I have developed to troubleshoot electronic circuits from over 50 years in the electronics industry. TROUBLESHOOTING TOOLS - CONTINUITY TESTERS A continuity tester (found on most multimeters) will allow you to check if there is a break or short in the circuit. Continuity testers apply a voltage across a pair of test probes and measure the current in the circuit. If no current is detected (indicating a short circuit), the continuity tester sounds an audible alarm. - MULTIMETERS A multimeter is used to measure voltage, resistance, and current. It’s good to have both a digital multimeter and an analog multimeter on hand, as they each have different applications. - OSCILLOSCOPES An oscilloscope is almost indispensable. Oscilloscopes let you to get high resolution look at the electronic signals flowing through your circuit. - SOLDERING TOOLS A soldering station or soldering iron is needed to repair solder joints and replace damaged components. A solder sucker or a solder wick can be used to remove the solder joints of faulty components. - OTHER TOOLS An X-Acto knife with sharp blades is useful for cutting wires and PCB traces. To get more ideas on building up your electronics workshop, check out our article on How to Build an Electronics Work Bench. HOW TO TROUBLESHOOT A CIRCUIT These are the things I check before diving deep into troubleshooting a circuit: - Does the PCB or breadboard match the circuit diagram? - Does the circuit have power? - Is the circuit getting the correct voltage? - Is the power supply connected the right way around? - Are all ICs, transistors, and diodes the correct type? - Are all resistors and capacitors the correct value? - Are all polarized components (electrolytic capacitors, diodes, LEDs, etc.) connected the right way around? - Do all of the solder joints have a good electrical connection? - Are there any broken traces on the PCB? Suspect any component that moves or has an interaction with a user. For example, components like potentiometers, switches, and push buttons can become fatigued at the solder joint to the PCB. Motors have brushes and commutators that wear out. Look for and test any fuses in the circuit. A fuse may look okay, but you can never be sure until you test it with a continuity tester. Look for any cut, cracked, or burned PCB traces. Hold the PCB up to strong light to help identify these.


Inverter DC to AC 12Vdc to 220Vac Re-Wiring Electronic Hobbies
Hobi Elektronika

Membuat INVERTER DC ke AC : 12V ke 220V

Membuat INVERTER DC to AC | 12Vdc ke 220Vac

Inverter daya , inverter , atau invertor adalah perangkat atau sirkuit elektronika daya yang mengubah arus searah (DC) menjadi arus bolak-balik (AC). Frekuensi AC yang dihasilkan bergantung pada perangkat tertentu yang digunakan. Inverter melakukan kebalikan dari penyearah yang awalnya merupakan perangkat elektromekanis besar yang mengubah AC menjadi DC. Inverter pada pembangkit listrik tenaga surya yang berdiri sendiri Ikhtisar inverter pembangkit listrik tenaga surya Tegangan masukan , tegangan dan frekuensi keluaran, serta penanganan daya secara keseluruhan bergantung pada desain perangkat atau sirkuit tertentu. Inverter tidak menghasilkan daya apa pun; daya disediakan oleh sumber DC. Inverter daya dapat sepenuhnya elektronik atau mungkin kombinasi efek mekanis (seperti alat putar) dan sirkuit elektronik. Inverter statis tidak menggunakan bagian yang bergerak dalam proses konversinya. Inverter daya terutama digunakan dalam aplikasi tenaga listrik di mana terdapat arus dan tegangan tinggi; rangkaian yang menjalankan fungsi yang sama untuk sinyal elektronik, yang biasanya memiliki arus dan tegangan sangat rendah, disebut osilator . Rangkaian yang melakukan fungsi sebaliknya, mengubah AC menjadi DC, disebut penyearah. Tegangan masukan Perangkat atau rangkaian inverter daya pada umumnya memerlukan sumber daya DC stabil yang mampu menyuplai arus yang cukup untuk kebutuhan daya sistem yang diinginkan. Tegangan input tergantung pada desain dan tujuan inverter. Contohnya meliputi: 12 V DC, untuk konsumen kecil dan inverter komersial yang biasanya dijalankan dari baterai asam timbal 12 V yang dapat diisi ulang atau stopkontak listrik otomotif. 24, 36, dan 48 V DC, yang merupakan standar umum untuk sistem energi rumah. 200 hingga 400 V DC, bila daya berasal dari panel surya fotovoltaik. 300 hingga 450 V DC, bila daya berasal dari baterai kendaraan listrik dalam sistem kendaraan-ke-jaringan. Ratusan ribu volt, dimana inverter merupakan bagian dari sistem transmisi tenaga listrik arus searah tegangan tinggi . Bentuk gelombang keluaran Inverter dapat menghasilkan gelombang persegi , gelombang sinus , gelombang sinus termodifikasi, gelombang sinus berdenyut, atau gelombang termodulasi lebar pulsa (PWM) mendekati sinus tergantung pada desain sirkuit. Jenis inverter yang umum menghasilkan gelombang persegi atau gelombang kuasi persegi. Salah satu ukuran kemurnian gelombang sinus adalah distorsi harmonik total (THD). Standar teknis untuk jaringan distribusi listrik komersial memerlukan kurang dari 3% THD dalam bentuk gelombang di titik sambungan pelanggan. Standar IEEE 519 merekomendasikan THD kurang dari 5% untuk sistem yang terhubung ke jaringan listrik. Ada dua desain dasar untuk menghasilkan tegangan plug-in rumah tangga dari sumber DC bertegangan rendah, yang pertama menggunakan konverter boost switching untuk menghasilkan DC bertegangan lebih tinggi dan kemudian diubah menjadi AC. Metode kedua mengubah DC menjadi AC pada level baterai dan menggunakan transformator frekuensi saluran untuk menghasilkan tegangan keluaran.


Menggunakan Transistor NPN TIP31 TIP41 dan Transformers 9V CT 2 Ampere
Hobi Elektronika

Saklar Pompa Air Otomatis | Water Pump Automatic Switch

Water Pump Automatic Switch - Saklar Pompa Air Otomatis

Water pump for home, domestic use, offices or warehouses, pressurizers and systems to raise water to water tanks, irrigation, submersible well or plastic water storage tanks.

In many areas, a residential water pump is needed in the home to provide a constant flow for domestic use. Whether you need good pressure for a shower, getting water from a borehole or even watering the lawn, a home water pump can make it happen. But with so many types of domestic water pumps available, it can be difficult to decide which one will be the best water pump for your needs.

The type of pump you go with depends on where your water supply will come from and what type of output you need. These are the main types of water pumps:

Submersible water pumps:

These can be completely submerged in water from a deep or open well, to draw water to a storage point in a cistern or cistern.

Compressor pumps:

These are used to move water where water yield is lower and can be used even in areas of loose soil.

Self-priming regenerative pumps:

Similar to centrifugal pumps, they are also used to lift water, but do not require priming. They can be used to lift water from a ground tank to a tank located at a higher elevation.

Centrifugal jet pumps:

They provide a steady, strong flow of water with the water coming from underground. Depending on the depth, you can get a centrifugal deep well jet or a shallow well jet pump. These pumps can lift water from more than 25 feet deep.

In-line recirculating pumps:

These pumps are used to circulate hot or cold water within the home. They are usually installed with a water heater to supply hot water to different parts of the house.

Booster pumps:

When a pressurized flow of water is required, for example, in gardens or bathrooms, this type of pump is used.

Consult the specifications.

Once you have decided on the type of pump you want to buy, you will need to look at the specifications. This is an equally important part, as your home water pump must be able to get a sufficient amount of water at the pressure you need. Here are some of the specifications you should look out for and what they mean:

Discharge rate: also known as flow rate, this is measured in liters per minute (LPM). This will be the amount of water that is pumped within a specific time. The higher it is, the faster it pumps. A range of 100-200 LPM is usually sufficient for a home.

Head range: here the head refers to the discharge height, the vertical distance at which it will pump the water. The head range must be within this distance for the water pump to pump water effectively. This is measured in meters (m).

Power: This is the amount of electrical power the pump will consume when in use and can be measured in kilowatts (kW) and horsepower (HP). This varies from 0.5 to 1.5 HP for most pumps, with some such as the in-line circulating pump requiring as little as 0.16 HP. This will vary depending on the other pump specifications, but generally as the amount of water pumped and the load range increases, so does the horsepower.


Gambar Skema - PCB - Rangkaian Instalasi - Simulasi IC 555 dan Relay
Hobi Elektronika

Music Box - Bell Music - Simple Circuit using NE555 & CD4017B

Music Box - Bell Music

In 1796, Antoine Favre of Geneva, Switzerland made the key breakthrough.
He replaced bells with pre-tuned metal strips that made possible a broader scale and more precise sound.
Plucked teeth arrive! This advanced miniaturization further.
Music is married to the pocket watch. Adding a clock-like spring driven mechanism, an on/off switch and removable cylinders provided control and variety to music boxes and pocket watches.
Like the old German wall clock with glass bell chimes, some music boxes had tuned bells struck by hammers that are driven by the pinned cylinder, to accompany the music provided by the plucked metal comb.
There, Alix Gueissaz made music boxes.
The tie back to the 14th Century carillon was reestablished in miniature. Design evolution continued with the musical pocket watch. Both the box and watch rapidly developed in Geneva; and after 1811 in Sainte-Croix (L'Auberson), Switzerland.
This improvement grew the single piece comb to 290-325 teeth.
His son Jules-Louis was the firm's salesman and started selling abroad, notably to Ismail, shah of Persia (Iran). Other advances included the "sectional comb", which allowed a greatly expanded number of notes and octaves. The one-piece comb replaced the 1 through 6 teeth per section combs.
By the 1850's key wind was replaced by the lever spring winder.
Three hundred plus teeth offered a much greater note scale than the 88-note piano keyboard. Boxes became more ornate. Musical arrangements were limited only by the tune arranger's imagination. Musical sounds expanded with harmony, mandolin, guitar, piano, drum, bells, expression changes and triangle. The box cylinder now contained six to twelve tunes.
In 1877, Edison's talking machine came along but remained for decades, a comparatively primitive recording device.
Uninterrupted play was achieved. As the Civil War raged in the U.S., the 1860's also saw some music boxes combined with organ pipes and triangle. In other designs, a clock could activate the music box cylinder to play a different tune on the hour. That took a lot of spring winding. In the later 19th Century, music boxes were also married to moveable figures, both human and animal.
Electricity, the food of radio and later electronics was beginning to grow across America.
Birds sing in cages and feed their young. Ballerinas pirouette. Japanese geishas flirted to music and animals both wild and domestic moved to music, all before movies, phonograph or radio.
Toiling by sunlight and whale oil lamps, workers fitting pins, one-by-one, into brass cylinders were being replaced by factory mass production of stamped metal discs.

Simple Circuit using NE555 & CD4017B Electronic Hobbies Hobi Elektronika

12V LED Flasher for Car or Motorcycle

12V LED Flasher for Car or Motorcycle

It operates by building current in the inductor through a saturated transistor, and then cutting the transistor off and letting the flyback current flow through the LED.
Normally, a three volt source could not light a white LED, but using the inductor as an energy conversion device, we can.
Biasanya, sumber tiga volt tidak dapat menyalakan LED putih, namun dengan menggunakan induktor sebagai perangkat konversi energi, kita dapat menyalakannya.
Ini beroperasi dengan membangun arus dalam induktor melalui transistor jenuh, dan kemudian memotong transistor dan membiarkan arus flyback mengalir melalui LED.


Simple Circuit using Relay - Capacitor - Resistor - LED
Electronic Hobbies Hobi Elektronika

LED Flasher 2 Mode - Simple Circuit using Relay, Capacitor Elco, LED 12V

LED Flasher - 2 Mode

It operates by building current in the inductor through a saturated transistor, and then cutting the transistor off and letting the flyback current flow through the LED.
Normally, a three volt source could not light a white LED, but using the inductor as an energy conversion device, we can.
Biasanya, sumber tiga volt tidak dapat menyalakan LED putih, namun dengan menggunakan induktor sebagai perangkat konversi energi, kita dapat menyalakannya.
Ini beroperasi dengan membangun arus dalam induktor melalui transistor jenuh, dan kemudian memotong transistor dan membiarkan arus flyback mengalir melalui LED.


Simple Circuit using Relay, Capacitor Elco, LED 12V Electronic Hobbies
Hobi Elektronika